cancel
Showing results for 
Search instead for 
Did you mean: 
jane3144fitzgibb
New Contributor

Preparation of 1% Furfural Solution

Hi, I need clarification on the term "reagent-grade ethyl alcohol" mentioned in the protocol for preparing a 1% Furfural Solution.

Does "reagent-grade ethyl alcohol" correspond to any of the following?

Reagent Alcohol
Ethanol (96%)
Ethanol, Absolute
If anyone has insights or experience with this specification, your guidance would be greatly appreciated. Thanks in advance!

0 Kudos
1 Reply
eva78mason
New Contributor

Re: Preparation of 1% Furfural Solution


@jane3144fitzgibbmychart Wellstar org wrote:

Hi, I need clarification on the term "reagent-grade ethyl alcohol" mentioned in the protocol for preparing a 1% Furfural Solution.

Does "reagent-grade ethyl alcohol" correspond to any of the following?

Reagent Alcohol
Ethanol (96%)
Ethanol, Absolute
If anyone has insights or experience with this specification, your guidance would be greatly appreciated. Thanks in advance!


The term "reagent-grade ethyl alcohol" generally refers to ethanol that is pure and suitable for laboratory use, typically having a minimum concentration of 95% ethanol by volume. However, there are different types of ethanol used in laboratories, and it's important to understand the distinctions to ensure you are using the correct grade for preparing your 1% furfural solution. Here’s a breakdown of the options you mentioned:

  1. Reagent Alcohol: This typically refers to ethanol that has been denatured (rendered undrinkable by adding substances like methanol or other chemicals) and is often used in non-consumable applications. It might not be pure enough for all laboratory applications that require high precision. Unless specifically noted in your protocol, reagent alcohol is not the same as pure ethanol.

  2. Ethanol (96%): This refers to a solution that contains 96% ethanol and 4% water. It's commonly used in laboratories and may be suitable for your 1% furfural solution if the protocol doesn't specify a need for absolute (100%) ethanol. Since it's very close to reagent-grade alcohol, it can often be used in most laboratory procedures that require ethanol. However, if the protocol specifically asks for pure ethanol, you might need something closer to absolute ethanol.

  3. Ethanol, Absolute (100%): This is pure ethanol with little to no water content, and it is often used in cases where high purity is required (such as in analytical or chemical synthesis). Absolute ethanol is the closest to "reagent-grade ethanol", assuming no denaturants are present. If the protocol specifies reagent-grade ethanol, this would be the best option.

Best regards,
Eva Mason

0 Kudos